,

Teardrop Flag Banner Complete Package


Compare

The Teardrop banner stand outdoor flag package comes with a single-sided or double-sided custom print, stand and spike base or x-base. With the default spike base, use this flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays such as this one. For the double-sided teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.  Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

$147.83

    • $
    • $
    • $
    • $
    • $
    • $
    • $
    • $
    • $
    • $
    • $
    • 63.18 $
    • 116.22 $
    • 92.82 $
    • 43.58 $
    • 7.8 $
    • 92.82 $

The Teardrop banner stand outdoor flag package comes with a single-sided or double-sided custom print, stand and spike base or x-base. With the default spike base, use this flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays such as this one. For the double-sided teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.  Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Available in 4 sizes:

  • 8.2′
  • 11′
  • 14.5′
  • 15.75′

Package includes:

  • Pole
  • X-Base or Spike Base
  • Printed Banner – Single-Sided or Double-Sided
  • Nylon Bag

Wind Speed Rating:
18 – 23 mph

SKU: VPSTEARDROPFCP Categories: , Tags: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.